List of Materials
(nominal dimensions* in inches)

Poles ** (9) (length is dependent on depth of hole required by local codes)	4 x 6 x 10’ (or 12’)
Top girts (2)	2 x 8 x 16’
Top plates & side girts (6)	2 x 4 x 16’
End girts (4)	2 x 4 x 10’
Trusses
(18)	2 x 4 x 8’
(9)	2 x 4 x 10’
(9)	2 x 4 x 12’
Splashboards **
(1)	2 x 6 x 10’
(2)	2 x 6 x 16’
Door header	2 x 4 x 10’
Fascia & gable trim (4)	1 x 6 x 16’
Corner trim (4)	1 x 6 x 8’
Overhead door trim	1 x 3 x 8’
Overhang braces (2)	4 x 4 x 8’
Roof sheathing, soffit & gussets (13 sheets)	3/8” x 4’ x 8’ (CDX plywood)
Overhead garage door Shingles	2-2/3 squares
15 lb. felt	1 roll
Drip edge	70’
Windows (2)	Any suitable size
Gable vent (louvered aluminum)	12 x 14
Nails
(18)	80d serrated pole barn
(4 lbs)	30d serrated pole barn
(6lbs)	6d coated
(6lbs)	8d galvanized finish
(5lbs)	1-1/4” roofing, galvanized
Flathead shutter screws (20)	#8 x 1-1/2”
Washers or plastic shutter spacers (16)

* Standard lumber yard dimensions
** Pressure-treated lumber

CorniceFrame Detail | End Elevation | Front Elevation | Pole Location 1 | TrussDetail 1 | Shutter Detail

Click here for a FREE Woodworking DVD
Sawdust Therapy and the Shopsmith MARK V