Just
Ask
Smitty
ASK
SMITTY!
Here are the questions . . . and
SMITTY’S answers for this issue!
JULY/ AUG 2001
Volume
44 / Issue 4
IN THIS ISSUE
Project
Articles
Butcher
Block/ Microwave Oven Table
Gourmet
Bird Feeder
Recipe
Box and Interlocking Play Logs
DEPARTMENTS
Ask
Smitty
Owner’s
Gallery
Letters
from Owners
Academy Notes
All
About Saw Blades
Find
A Shopsmith Woodworking Academy Near You
National
Woodworking Academy in Dayton, OH
Service
Pointers
Bandsaw
Service Pointers
Safety
Tips
The
Safety Caper...
SURF’S UP
The
Shopsmith Universal
Lathe Tool Rest
Specials
& Online Catalog
Links
Worth Visiting
Find
A Shopsmith
MARK V Demo Near You
FREE FROM SHOPSMITH
Free
Woodworking Tips
Request
Accessory Catalog
Request
MARK V Information Package
FEEDBACK
Contacting
Shopsmith
Copyright
2001.
Shopsmith, Inc.
All Rights Reserved
No More
Whining!
From
Jay Dickinson, via e-mail:
I am not a constant user of my tools. Lately, when I start my Mark
V, I'm getting a high pitched whining noise. I tried oil. But, maybe I'm
oiling in the wrong place. What locations would you recommend?
Without being able to inspect your MARK V first-hand, there are three
possible problems:
1: The control and motor sheaves of your MARK V may require lubrication. Follow the guidelines outlined in your MARK V owner's manual. If you don't have a manual, you can order one through our on-line catalog. If your MARK V is a newer model 510 machine (with round rip fence/extension table tubes), order part # 845332 ($34.99) at our website. If you have an older MARK V Model 500 machine (with extruded aluminum rails for the rip fence and on the extension table), order part # 845435 ($15.99).
2: Your drive belt or Poly-V belt may be deteriorated or frayed and require replacement. I suggest that you call our Technical Services Hotline at 1-800-762-7555 to be sure you order the correct belt for your machine.
3: Your nylon drive & ring assembly (Part # 514083 -- $5.56). may have worn splines, which could allow it to rattle and possibly cause your whining. If none of these resolve your problem, you may need to call Technical Services (800-762-7555) to get some alternatives and possibly arrange to ship your headstock to us for a closer look.
Have a Question? E-Mail Smitty Today. . .
If
you're having a problem setting-up, aligning or maintaining your Shopsmith
equipment, you should contact Shopsmith's Technical Support Staff (NOT
Smitty).
Call TOLL-FREE, 1-800-762-7555 during normal business hours to
speak directly with a Shopsmith Technical Support Representative.
