Picture

ISSUE ARCHIVES

MAY/ JUNE 2001
Volume 44 /  Issue 3

IN THIS ISSUE
Project Articles
Curio Cabinet
Pot-Holding Garden Planter
Kitchen Pasta Tools

DEPARTMENTS
Ask Smitty
Owner’s Gallery
Letters from Owners
 
Academy Notes
Gluing-Up Tips
 
How to Set-up and Use your Shopsmith Complete Cabinet Set Shaper Cutters
 
Find A Shopsmith Woodworking Academy Near You

National Woodworking Academy in Dayton, OH
 
Service Pointers
Table Saw Service Pointers -- Rip Fence, Miter Gauge & Extension Table Troubleshooting
 
Safety Tips
Do’s and Don’ts

SURF’S UP
The Shopsmith Hollow Chisel Mortising Attachment
Specials & Online Catalog
Links Worth Visiting
Find A Shopsmith
MARK V Demo Near You

FREE FROM SHOPSMITH
Free Woodworking Tips
Request Accessory Catalog
Request MARK V Information Package

FEEDBACK
Contacting Shopsmith

Copyright 2001.
Shopsmith, Inc.
All Rights Reserved

Picture

“What’s
New” at
Shopsmith

The Shopsmith Hollow Chisel
Mortising Attachment

Back by popular demand
 
Several years ago, we discontinued the Hollow Chisel Mortising Attachment that we had offered for many years. This was due largely to the fact that hollow chisel mortising was fading in popularity…as more and more woodworkers were turning to slot mortising with a router. As is the case with many things in life, this trend is now reversing itself as hollow chisel mortising regains its popularity. Fortunately, we held onto the tooling for this once popular accessory and are now able to bring it back, as per your requests.

Picture

The principle of this special tool is really quite simple. Just install your Drill Chuck on the MARK V spindle. Then, slip the Mortising Attachment over the outside of the quill on your MARK V and tighten it in position with a single 5/32-inch setscrew. Insert the Mortising Chisel of your choice (1/4-inch, 3/8-inch or 1/2-inch) in the other end of the attachment and tighten the setscrew. Now, slip the appropriate Mortising Bit up through the hollow chisel and secure its shaft in your drill chuck.
 
The attachment holds the chisel (with sharp, honed edges) and keeps it from rotating while the special Mortising Bit inside turns. As you advance the quill, the rotating bit removes the majority of the stock while the chisel’s edges shave the sides of the mortise square and smooth. The special Hold-Down attaches to the top of your MARK V’s rip fence to keep your workpiece from lifting when the chisel is withdrawn.

The Shopsmith Mortising Package
will help you make all of these mortised joints

Picture

Through

Keyed

Haunched

Blind

Loose
Wedged

Cogged

Three-Way

Twin

Check out the Shopsmith Hollow Chisel Mortising Attachment
in the Accessory Catalog Today!